When the feed device is manual mode or when using a simple feeder, it must be checked whether the material is sufficient to prevent a collision due to insufficient material.Before starting the core, please read the waing logo on the machine and strictly enforce it.

The following items should be noted in the operating procedures for walking:The operation of the machine is one of the important measures to ensure the safety operation of CNC machine tools, and the operator must strictly follow the operation procedure to ensure a smooth operation of the person's safety and machine tool. Pay attention to the axis sequence in the tool movement during programming.

Be sure to check the diameter of the material before replacing the processing material, preventing the material diameter (chuck) to hold and collide.After the power is restarted, you need to move the axis to the machining point in manual or MDI mode, otherwise it may crash. When moving each axis, please pay attention to the collision between the tool and the workpiece.In the operational program, you should clearly specify the order in which startup and off, you should pay attention to it.

During the operation of walking the machine, the operator may not open or tu off the electric cabinet door; During the operation of CNC operation, do not modify parameters at will; The axis wear compensation of each machine is different, and the replacement tool must be retued to the safe distance. When the machine is ruing China custom auto parts Manufacturers normally, it is forbidden to press the following buttons: emergency stop switch, reset switch, etc

امتیاز بدهید :